English
 |
| Quantity: | |
|---|---|
OAPF-260EL
OLAT
8443140000
Industry field
Pad printing machine is a kind of printing equipment, suitable for plastics, toys, glass, metal, ceramics, electronics, IC, etc. Pad printing can be used on a variety of substrates,particularly oddly shaped objects that are difficult to screen print.
The printing process is simple: first, the design pattern is etched on the printed plate, apply the ink on the etched plate, and then transfer the ink to the print through the rubber head.
Printing steel plates are consumables used on printing presses. In addition, if it needs to be used during the print transmission process, it also needs to be processed again. The printed content that needs to be printed is etched to the steel plate through the photosensitive pulp, exposure, development, corrosion and other processes, and the content is etched to the steel plate.
The printing process is highly adaptable to the irregular bearing surface.
The printing rubber head is deformed under pressure and applied to the pressure surface. High hardness of the rubber head small deformation, suitable for printing plane load-bearing materials and fine lines. The adhesive head with lower hardness is more deformed. Suitable for large area printing and color block printing. The printing rubber head should be designed to be a cone, its central part should first contact with the printing plate and load-bearing materials, with the increase of pressure, the edge and then gradually contact with the product, to achieve printing.
Tesla Car calipers Printing Equipment
car calipers
| Model | OAPF-260EL |
| The Stander Diameter of the Ink-cup (mm ): | Φ90mm |
| The Ink cup Plate Size (mm ): | 100*400 |
| Maximum Pad Pressure (kg): | 500 |
| Maximum Printing Speed (Cycles/hour ): | 600 |
| Maximum Height of Work pieces (mm): | 300 |
| Power Requirement : | 220V/50HZ/3000W |
| Machine Size(mm): | 1000*1050*2100 |
Product case
Industry field
Pad printing machine is a kind of printing equipment, suitable for plastics, toys, glass, metal, ceramics, electronics, IC, etc. Pad printing can be used on a variety of substrates,particularly oddly shaped objects that are difficult to screen print.
The printing process is simple: first, the design pattern is etched on the printed plate, apply the ink on the etched plate, and then transfer the ink to the print through the rubber head.
Printing steel plates are consumables used on printing presses. In addition, if it needs to be used during the print transmission process, it also needs to be processed again. The printed content that needs to be printed is etched to the steel plate through the photosensitive pulp, exposure, development, corrosion and other processes, and the content is etched to the steel plate.
The printing process is highly adaptable to the irregular bearing surface.
The printing rubber head is deformed under pressure and applied to the pressure surface. High hardness of the rubber head small deformation, suitable for printing plane load-bearing materials and fine lines. The adhesive head with lower hardness is more deformed. Suitable for large area printing and color block printing. The printing rubber head should be designed to be a cone, its central part should first contact with the printing plate and load-bearing materials, with the increase of pressure, the edge and then gradually contact with the product, to achieve printing.
Tesla Car calipers Printing Equipment
car calipers
| Model | OAPF-260EL |
| The Stander Diameter of the Ink-cup (mm ): | Φ90mm |
| The Ink cup Plate Size (mm ): | 100*400 |
| Maximum Pad Pressure (kg): | 500 |
| Maximum Printing Speed (Cycles/hour ): | 600 |
| Maximum Height of Work pieces (mm): | 300 |
| Power Requirement : | 220V/50HZ/3000W |
| Machine Size(mm): | 1000*1050*2100 |
Product case
